TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 227 of 856
REMOVAL - Continued
3.
Remove eight bolts (Figure 1, Item 6), eight flat washers (Figure 1, Item 7), eight lockwashers
(Figure 1, Item 8), and four mounting brackets (Figure 1, Item 9) from engine block. Discard lockwashers.
END OF TASK
FOLLOW ON TASK
1.
Install engine to container (models 5063-5299, 5063-5392, 5063-5393, and 5063-539L) (WP 0033).
2.
Install engine to container (model 5063-5299) (WP 0032).
3.
Install air box drains (models 5063-5392, 5063-5393, and 5063-539L) (WP 0028).
4.
Install air box drains (model 5063-5299) (WP 0027).
5.
Install electric starter (WP 0026).
6.
Install turbocharger oil supply line (all except model 5063-5299) (WP 0025).
7.
Install fuel filters and mounting brackets (models 5063-5393 and 5063-539L) (WP 0024).
8.
Install fuel filters and mounting bracket (model 5063-5392) (WP 0023).
9.
Install engine oil cooler (models 5063-5393 and 5063-539L) (WP 0022).
10.
Install engine/transmission oil cooler (model 5063-5392) (WP 0021).
11.
Install engine/transmission oil cooler (model 5063-5299) (WP 0020).
12.
Install oil filter assembly and adaptor (models 5063-5393 and 5063-539L) (WP 0019).
13.
Install oil filter assembly and adaptor (Model 5063-5392) (WP 0018).
14.
Install oil filter adaptor (model 5063-5299) (WP 0017).
15.
Install oil level gauge rod (models 5063-5393 and 5063-539L) (WP 0016).
16.
Install oil level gauge rod (model 5063-5392) (WP 0015).
17.
Install oil level gauge rod (model 5063-5299) (WP 0014).
18.
Install coolant pump and idler pulley assembly (WP 0013).
19.
Install fuel junction block and lines (models 5063-5393 and 5063-539L) (WP 0012).
20.
Install transmission oil cooler (models 5063-5393 and 5063-539L) (WP 0011).
21.
Install container top (WP 0010).
END OF TASK
END OF WORK PACKAGE
TM 9-2815-205-24
0034
0034-3/blank
Back to Top
