TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 239 of 856

INSTALLATION - Continued

3.

Install insulator set (Figure 1, Item 1) on exhaust tube (Figure 1, Item 2), insulator set (Figure 1, Item 8) on

exhaust tube (Figure 1, Item 9), and insulator set (Figure 1, Item 7) on exhaust tee (Figure 1, Item 6).

Fasten insulator sets together using new wire (Figure 1, Item 10) and wire twister pliers as follows:

a.

Loop new wire around first capstan (Figure 2, Item 12) and apply two twists using wire twister pliers.

b.

While holding insulator set in place by hand, place ends of new wire on each side of adjacent capstan

(Figure 2, Item 13) and apply at least two more twists using wire twister pliers.

c.

Trim new wire 3/4 inch (20 mm) from second capstan.

d.

Repeat Steps 3.a. – 3.c. for remaining pairs of capstans on insulator sets.

12

13

MAINT_097

Figure 2.

Insulator Set Installation.

END OF TASK

FOLLOW ON TASK

Install turbocharger (WP 0035).

END OF TASK

END OF WORK PACKAGE

TM 9-2815-205-24

0037

0037-3/blank