TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 126 of 596

TM 9-2815-205-34

CHAPTER 3

REPAIR PROCEDURES FOR MAJOR COMPONENTS

Section I. GENERAL INFORMATION

3-1. GENERAL.

This chapter provides the repair procedures performed on all engine models after

the engine has been installed on the maintenance stand. The sequence of the repair procedures is

done by the order the engine would be taken apart whenever possible. Component replacement

typically consists of removal, disassembly, cleaning/inspection, repair, assembly, and installation of the

component. Next, the engine block maintenance consists of disassembly, inspection, repair, and

assembly of the block components. For major components, the repair is handled separately from

removal and installation. Component repair usually consists of disassembly, cleaning/inspection, and

assembly. When two or more models have identical or nearly identical components, those models will

be covered in the same task. Direct Support and General Support procedures are separated by

section.

3-1/(3-2 blank)