TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 125 of 596

TM 9-2815-205-34

2-37. FUEL FILTER AND STRAINER REPAIR (Cont)

c. Assembly

NOT E

Ž

A cast letter “P” (primary) is on top of strainer head.

•

The filter element, small gasket, and large gasket are provisioned together.

(1) Fuel primary filter assembly (strainer)

(a)

(b)

(c)

(d)

(e)

Place filter element (7) over center stud in shell assembly (4) and push down until seated.

Place large gasket (8) in recess of strainer head (2).

Place filter element (7) and shell

assembly (4) under strainer head (2)

and install gasket (6) and bolt (5).

Tighten bolt just enough to prevent

fuel leakage.

Install drain cock (3) in shell assembly

(4).

Install three plugs (1) in strainer head

(2).

NOT E

A cast letter “S” (secondary) is

on top of filter head.

(2) Fuel secondary filter assembly (filter)

(a)

(b)

(c)

(d)

(e)

Install spring (20), spring seat (19),

gasket (18), seat (17), and retaining

ring (16) in filter body (10).

Place filter element 13) over center

stud in filter body (10) and push

against seat (17).

Place large gasket (14) in recess of

filter head (15).

Place filter element (13) and filter

body (10) under filter head 15) and

install small gasket (12) and bolt (11).

Tighten bolt just enough to prevent

fuel leakage.

Install drain cock (9) in filter body (10).

END OF TASK

2-98