TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 180 of 596

TM 9-2815-205-34

f. Installation

(1) For all models except model 5063-539L, position gasket (5) and preformed packing (4) on air

box heater (3). Lubricate packing with engine oil.

NOTE

●

For all models except model 5063-539L, do not install the bolt, in lower left hole (when

facing engine), and copper washer, fastening air box heater assembly to front cover,

until connection of ground wire.

●

Model 5063-539L has a special air heater hole plug and no air box heater.

(1.1)

(2)

(2.1)

For model 5063-539L, position gasket (5) and preformed packing (4) on air box heater hole plug

(3). Lubricate packing with engine oil.

For all models except model 5063-539L, install air box heater (3), two copper washers (2), and

two bolts (1) in engine front cover (6) with fuel inlet port positioned at bottom. Torque bolts to

13-17 lb-ft (18-23 NŽm).

For model 5063-539L, install air heater hole plug (3), and three flange head locking bolts (1) in

engine front cover (6). Torque bolts to 13-17 lb-ft (18-23 NŽm).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-10 Connect fuel lines, air lines, solenoid, and electrical harness to air box heater (models

5063-5299, 5063-5395, 5063-5398, and 5063-539F).

3-11 Connect fuel lines, air lines, solenoid, and electrical harness to air box heater (model

5063-5392).

3-12 Connect fuel lines, air lines, solenoid, and electrical harness to air box heater (model

5063-5393).

Change 1

3-51