TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 187 of 596

TM 9-2815-205-34

3-15. THERMOSTAT HOUSING AND CROSSOVER TUBE REPLACEMENT (MODELS 5063-5393

AND 5063-539L)

(Cont)

c. Installation

(1) Using thermostat seal installer and seal installer handle, press seal (29) in thermostat water

outlet (21). Position seal so lip will face away from thermostat.

(2) Install thermostat (27) in thermostat water outlet (21). If removed, install plug (29) in outlet.

NOTE

The transmission oil cooler as-

sembly (20) and thermostat

water outlet (21) were removed

in Para 2-4 to allow mounting

engine on maintenance stand.

(3) Install gasket (26), thermostat water outlet

(21), four lockwashers (24), four flat

washers (25), two short bolts (22), and two

long bolts (23) on top of transmission oil

cooler assembly (20). Torque bolts to

13-17 lb-ft (18-23 NŽm).

3-58

Change 1