TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 188 of 596

TM 9-2815-205-34

(4) Install gasket (19), water outlet tee (5), two flat washers (18), two lockwashers (17), and two

screws (16) on front of left cylinder head. Torque screws to 30-35 Ib-ft (41-47 N-m).

(5) Install bracket (15), three flat washers (14), three Iockwashers (13), one short screw (12), and

two Iong

screws (11) on water outlet tee (5) and cylinder head. Torque screws to 30-35 lb-ft

(41-47 N

.

m).

(6) Install gasket (9), water outlet elbow (4), two Iockwashers (7), two flat washers (8), and two

screws (6) to front of right cylinder head. Torque screws to 30-35 Ib-ft (41-47 N-m).

(7)

(8)

If removed, install plug (10) in water outlet elbow (4).

Slide two hoses (2) and four clamps (1) onto crossover tube (3). Install crossover tube between

water outlet elbow (4) and water outlet tee (5). Slide two hoses and four clamps over

connections and tighten clamps.

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-12 Install air pump assembly bracket and angle bracket.

3-59