TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 182 of 596

TM 9-2815-205-34

b. Inspection

Ž Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles

and gloves and use in a well-ventilated area. Avoid contact with skin, eyes, and

clothes. Do not breathe vapors. Do not use near open frame or excessive heat.

The flash point is 100-138°F (38-50°C). if you become dizzy while using cleaning

solvent, get fresh air immediately and seek medical aid. If contact with eyes is

made, wash with water and get medical aid immediately.

• Compressed air used for cleaning purposes will not exceed 30 PSI. Use only

with effective chip guarding and personal protective equipment (goggles/shield,

gloves, etc.)

(1) Clean plugs and metal parts in dry cleaning solvent and dry in compressed air. Clean drain

cock with probe.

(2) Inspect crossover tubes for cracks or damage.

(3) Inspect hoses for cracks, wear, or damage.

3-53

WARNING