TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 185 of 596

TM 9-2815-205-34

3-15. THERMOSTAT HOUSING AND CROSSOVER TUBE REPLACEMENT (MODELS 5063-5393

AND 5063-539L)

This task covers: a. Removal

b. Inspection

c. Installation

INITIAL SETUP

MODELS

MATERIALS/PARTS

5063-5393 5063-539L

Seal (App F, Item 168)

Gasket (App F, Item 86)

TOOLS AND SPECIAL TOOLS

Gaskets (App F, Item 40)

Tool kit, general mechanics (App B, Item 107)

Lockwashers (App F, Item 99)

Wrench, torque (App B, Item 116)

Lockwashers (App F, Item 98)

Installer, thermostat seal (App B, Item 68)

Handle, seal installer (App B, Item 51)

EQUIPMENT CONDITION

Para Description

3-12 Air pump assembly bracket and angle

bracket removed

a. Removal

(1)

(2)

Loosen four clamps (1) and two hoses (2) connecting crossover tube (3) to water outlet elbow

(4) and to water outlet tee (5). Slide clamps and hoses onto crossover tube. Remove tube and

slide clamps and hoses off tube.

Remove two screws (6), two lockwashers (7), two flat washers (8), water outlet elbow (4)

gasket (9) from right cylinder head. Discard lockwashers and gasket.

, and

(3)

(4)

(5)

3-56

If necessary, remove plug (10) from water outlet elbow (4).

Remove two long screws (11), one short screw 12), three lockwashers (13), three flat washers

(14), and bracket (15) from water outlet tee (5). Discard lockwashers.

Remove two screws (16), two lockwashers (17), two flat washers (18), water outlet tee (5), and

gasket (19) from left cylinder head. Discard gasket and lockwashers.

Change 1