TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 194 of 596

TM 9-2815-205-34

b. Installation

(1)

(2)

Insert fuel crossover tube (21) into two

elbows (20) at front of cylinder heads.

Tighten nut on each elbow.

If removed, install clip (16) on hose assembly (17). Connect hose assembly

of right cylinder head and to elbow (19) at rear of left cylinder head. Tighten

to tee (12) in front

hose connections.

(3)

(4)

(5)

(6)

(7)

Connect hose assembly (17) to air inlet housing (18) with clip (16), screw (13), Iockwasher (14),

and flat washer (15). Torque screw to 16-20 Ib-ft (22-27 N-m).

Connect hose assembly (10) to tee (12) in front of right cylinder head. Tighten hose connection.

If removed, install clip (9) on hose assembly (10). Install clip, screw (6), Iockwasher (7), and flat

washer (8) on upper front cover (11). Torque screw to 30-35 Ib-ft (41-47 N-m).

Connect inlet hose assembly (1) to elbow (2) in fuel pump (3). Tighten hose connection.

Connect outlet hose assembly (4) to elbow (5) in fuel pump (3). Tighten hose connection.

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-15 Install coolant crossover tube.

3-12 Install air pump assembly and support.

3-65