TM 9-2815-205-34
C
. Cleaning/Inspection
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles
and gloves and use in a well-ventilated area. Avoid contact with skin, eyes, and
clothes. Do not breathe vapors. Do not use near open flame or excessive heat.
The flash point is 100-138°F (38-50°C). If you become dizzy while using cleaning
solvent, get fresh air immediately and seek medical aid. If contact with eyes is
made, wash with water and get medical aid immediately.
Compressed air used for cleaning purposes will not exceed 30 PSI. Use only with
effective chip guarding and personal protective equipment (goggles/shield,
gloves, etc.)-
(1) Clean rocker arm covers and breather housings with cleaning solvent and dry with compressed
air. Inspect covers and housings for cracks or other damage.
(2) Clean filtering disk with cleaning solvent and dry with compressed air.
Change 1
3-71