TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 193 of 596

TM 9-2815-205-34

3-18. FUEL LINES REPLACEMENT (MODELS 5063-5393 AND 5063-539L)

This task covers: a. Removal

b. Installation

INITIAL SETUP

MODELS

MATERIALS/PARTS

5063-5393 5063-539L

2

Lockwashers (App F, Item 99)

TOOLS AND SPECIAL TOOLS

EQUIPMENT CONDITION

Tool kit, general mechanics (App B, Item 107)

Para Description

Wrench, torque (App B, Item 116)

3-12 Air pump assembly and angle bracket

removed

3-15 Coolant crossover tube removed

a. Removal

(1)

(2)

(3)

(4)

(5)

(6)

(7)

Disconnect inlet hose assembly (1) from

elbow (2) in fuel pump (3). Remove hose

assembly.

Disconnect outlet hose assembly (4) from

elbow (5) in fuel pump (3). Remove hose

assembly,

Remove screw (6), lockwasher (7), flat

washer (8), and clip (9), on hose assembly

(10), from upper front cover (11). Discard

lockwasher. If necessary, remove clip from

hose assembly.

Disconnect hose assembly (10) from tee

(12) in front of right cylinder head. Remove

hose assembly.

Remove screw (13), lockwasher (14), flat

washer (15), and clip (16), on hose

assembly (17), from air inlet housing (18).

Discard lockwashers. If necessary, remove

clip from hose assembly.

Disconnect hose assembly (17) from tee

(12) in front of right cylinder head, and

from elbow (19) in rear of left cylinder

head. Remove hose assembly.

Loosen nut on two elbows (20), at front of

cylinder heads, and remove fuel crossover

tube (21).

3-64

Change 1