TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 250 of 596

TM 9-2815-205-34

d. Installation

(1)

(2)

Apply International Compound No.2 or equivalent to threads and to bolt head contact area

(underside) of all flywheel-fastening bolts (4). Fill threads completely with compound and

remove excess.

Thread two guide studs (6) into crankshaft flywheel assembly (3) bolt holes.

(3)

(4)

(5)

(6)

NOT E

Flywheel on model 5063-5299 is heavy, Use two 3/8-16 eye bolts and sling to lift

flywheel.

Guide flywheel assembly (3) over guide studs (6) and into bell of flywheel housing.

Install scuff plate (7) and four self-locking bolts (4). Snug bolts to hold plate and flywheel

assembly in place against crankshaft.

Remove guide studs (6) and install two remaining bolts (4). Snug bolts.

Torque bolts (4) to 48-52 Ib-ft (64-72 N•m).

Change 1

3-121