TM 9-2815-205-34
3-38. ENGINE FRONT SUPPORT REMOVAL/INSTALLATION (MODEL 5063-5299)
This task covers: a. Removal
b. Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5299
6
Lockwashers (App F, Item 100)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
a. Removal
(1) Slide preformed packing (1) off of support
(2).
NOT E
•
All engines except those used
in the M106A1/M106A2 and
M125A1/M125A2 vehicles use
six bolts with six Iockwashers
to retain a six-hole front
support to lower cover.
Ž
Engine s
in the M106A1 /
M106A2 and M125A1/M125A2
vehicles use eight self-locking
bolts with eight flat washers to
retain an eight-hole front sup-
port to lower cover.
(2) Remove bolts (3), washers (4), and
support (2) from lower front cover (5).
Discard Iockwashers if used.
b. Installation
(1) Install support (2), bolts (3), and washers
(4) against lower front cover (5). Torque
bolts to 46-50 Ib-ft (62-68 N
.
m).
(2) Slide preformed packing (1) on support
(2).
3-115