TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 236 of 596

c. Installation

(1)

(2)

(3)

(4)

(5)

(6)

Install bracket (8), two screws (20), eight flat washers (19), and two self-locking nuts (18) on

bracket (17). Loosely tighten screws.

Loosely install bracket (17), two special washers (16), two Iockwashers (15), and two screws

(14) on oil pump inlet tube (3).

Install strainer (13), two flat washers (12), and two self-locking bolts (11) on inlet tube (3).

Torque bolts to 13-17 lb-ft (18-23 N

.

m).

Install gasket (10), inlet tube (3), two Iockwashers (2), and two bolts (1) on lower front cover (4).

Torque bolts to 13-17 Ib-ft (18-23 N-m).

Install two special washers (7), two Iockwashers (6), and two screws (5) in bracket (8) at main

bearing cap (9). Torque screws to 30-35 Ib-ft (41-47 N-m).

Torque two screws (20) to 35-39 Ib-ft (47-53 N

.

m) and two screws (14) to 30-35 Ib-ft (41-47

N-m), on brackets (8 and 17).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-33

Install oil pan

3-107

TM 9-2815-205-34