TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 237 of 596

3-35. OIL PUMP INLET TUBE REPLACEMENT (ALL EXCEPT MODEL 5063-5299)
This task covers: a. Removal
b. Cleaning/Inspection
c. Installation
MODELS
MATERIALS/PARTS (CONT)
All except 5063-5299
7
Lockwashers (App F, Item 98)
4
Lockwashers (App F, Item 95)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
EXPENDABLE/DURABLE SUPPLIES
Wrench, torque (App B, Item 116)
Cleaning solvent (App C, Item 9)
MATERIALS/PARTS
EQUIPMENT CONDITION
2
Gaskets (App F, Item 54)
Para Description
1
Gasket (App F, Item 67)
3-33 Oil pan removed
2
Lockwashers (App F, Item 99)
a. Removal
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Remove two screws (1) and small Iockwashers (2) from inlet tube assembly (3) at lower front
cover (4). Discard Iockwashers.
Remove two screws (5), two Iockwashers (6), and two flat washers (7) from bracket (8) at main
bearing cap (9). Discard Iockwashers.
Remove inlet tube assembly (3) and gasket (10) from cylinder block. Discard gasket.
Remove two bolts (11), two Iockwashers (12), and strainer (13) from inlet tube assembly (3).
Discard Iockwashers.
Remove bolt (14), Iockwasher (15), flat washer (16), and bracket (17) from inlet tube assembly
(3). Discard Iockwasher.
Remove two nuts (18), two Iockwashers (19), four flat washers (20), two bolts (21), and bracket
(8) from bracket (17). Discard Iockwashers.
On model 5063-5398, remove two Ion bolts (22), two Iockwashers (23), two short bolts (24),
two special Iockwashers (25), outlet tube assembly (26), and two gaskets (27). Discard
lockwashers and gaskets;
b. Cleanlng/Inspection
WARNING
Ž
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles
and gloves and use in a well-ventilated area. Avoid contact with skin, eyes, and
clothes. Do not breathe vapors. Do not use near open flame or excessive heat.
The flash point is 100-138 Degrees F (38-50 Degrees C). If you become dizzy
while using cleaning Solvent, get fresh air immediately and seek medical aid. If
contact with eyes is made, wash with water and get medical aid immediately.
3-108
TM 9-2815-205-34


Back to Top