TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 242 of 596

3-37. CRANKSHAFT PULLEY OR HUB REMOVAL/INSTALLATION (MODELS 5063-5392,

5063-5395, 5063-5398, AND 5063-539F)

This task covers: a. Removal

b. Installation

INITIAL SETUP

MODELS

EXPENDABLE/DURABLE SUPPLIES

5063-5392 5063-5395 5063-5398 5063-539F

Oil, engine (App C, Item 26)

TOOLS AND SPECIAL TOOLS

Tool kit, general mechanics (App B, Item 107)

Wrench, torque (App B, Item 117)

Puller, mechanical three-leg (App B, Item 81)

Installer, crankshaft pulley (App B, Item 61)

a. Removal

(1)

(2)

(3)

(4)

(5)

NOT E

Secure flywheel or gear train to

prevent crankshaft from turn-

ing during removal of crank-

shaft screw.

Remove screw (1) and spacer ring (2)

from crankshaft.

Install screw (1) in crankshaft.

NOT E

Model 5063-5392 uses a hub

(3) and models 5063-5395,

5063-5398, and 5063-539F

use a pulley (4).

Using three-leg puller, remove outer

cone (5) and hub (3) or pulley (4) from

crankshaft.

Remove inner cone (6) from crankshaft.

Remove screw (1) from crankshaft.

3-113

TM 9-2815-205-34