TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992
TM-9-2815-205-34

  TM-9-2815-205-34 - Page 226 of 596

TM 9-2815-205-34
CAUTION
Place clean rag over oil drain holes in cylinder head to prevent cotter pin from falling
into engine.
(4) On right cylinder head, remove cotter pin (11) from pin (12). Remove pin from lower connecting
link (13) on injector control tube lever (14). Discard cotter pin.
(5) Remove self-locking nut (15) and disconnect lower connecting link (13) from upper connecting
link (16). Withdraw lower connecting link. Discard nut.
(6) Remove shoulder pin (17) and upper connecting link (16) from inside governor housing (4).
(7) Repeat steps (4) thru (6) for left cylinder head.
3-97


Back to Top