TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 218 of 596
TM 9-2815-205-34
3-29. TACHOMETER DRIVE REPLACEMENT (MODELS 5053-5395 AND 5053-5398)
This task covers: a. Removal
b: Installation
INITIAL SETUP
MODELS
MATERIALS/PARTS
5063-5395 5063-5398
2
Lockwashers (App F, Item 98)
1
Gasket (App F, Item 68)
TOOLS AND SPECIAL TOOLS
Tool kit, general mechanics (App B, Item 107)
Wrench, torque (App B, Item 116)
a. Removal
CAUTION
Use care when removing tachometer adapter. Tachometer drive shaft is fragile and
subject to breakage.
Remove two screws (1), two Iockwashers (2), tachometer generator (3), and gasket (4) from fly-
wheel housing. Discard Iockwashers and gasket.
(1) Place gasket (4) on flywheel housing.
(2) Guide square hole in tachometer generator (3) over drive shaft assembly (5) and install
tachometer generator (3), two lockwashers (2), and two screws (1) on flywheel housing. Torque
screws to 13-17 Ib-ft (18-23 N•m).
END OF TASK
3-89
Back to Top
