TM 9-2815-205-34
c. Installation
NOT E
Three air inlet housing screws were removed during removal of fuel line clip and air
pump bracket.
(1) Install screen (7), air inlet housing (6), nine flat washers (5), nine Iockwashers (4), two
mid-sized screws (2), three iong screws (3), and four short screws (1) on blower (8). Torque
screws to 16-20 Ib-ft (22-27 N
.
m).
(2) Install transducer (9) in air inlet housing (6).
END OF TASK
FOLLOW-ON MAINTENANCE
Para Description
3-12 Install mounting bracket.
3-18 Install fuel line clip.
3-3 Install turbocharger.
3-85