TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 212 of 596

TM 9-2815-205-34

c. Installation

NOT E

Angle bracket (3) mounts on right bank, third hole from rear of air inlet housing.

Three air inlet housing screws were removed during removal of fuel line clip and air

pump bracket.

(1)

Install screen (5) (with wire side toward blower), angle bracket (3), air inlet housing (4), nine

Iockwashers (2), and nine screws (1) on blower (6). Torque screws to 16-20 Ib-ft (22-27 N•m).

(2) If removed, install plug (7) and plug (8) in air inlet housing (4).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-11 Install angle bracket.

3-17 Install fuel line clip.

3-2 Install turbocharger.

3-83