TM 9-2815-205-34
c. Installation
NOT E
Right middle air inlet housing screw was removed during removal of fuel line clip.
(1) Install screen (6), air inlet housing (5), with air inlet toward rear of engine, five flat washers (4),
five Iockwashers (3), three short screws (2), and two long screws (1) on blower (7). Torque
screws to 16-20 Ib-ft (22-27 N•m).
(2) If removed, install plug (8) in air inlet housing (5).
END OF TASK
FOLLOW-ONMAINTENANCE
Para Description
3-19 InstalL fuel line clip.
3-3 Install turbocharger.
3-87