TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 225 of 596

TM 9-2815-205-34

3-31. GOVERNOR COVER AND THROTTLE CONTROL RODS REMOVAL/INSTALLATION

This task covers: a. Removal

b. Installation

INITIAL SETUP

MODELS

EQUIPMENT CONDITION

All

Para

3-19

TOOLS AND SPECIAL TOOLS

Tool kit, general mechanics (App B, Item 107)

3-20

Wrench, retaining nut (App B, Item 115)

3-21

MATERIALS/PARTS

Gasket (App F, Item 50)

3-22

Washers, copper (App F, Item 185)

Gasket (App F, Item 79)

Pins, cotter (App F, Item 118)

Nuts, self-locking (App F, Hem 105)

Description

Fuel line clip removed (models 5063-5395

and 5063-539F)

Rocker arm covers removed (models

5063-5299 and 5063-5398)

Rocker arm covers removed (models

5063-5392, 5063-5393, 5063-539F and

5063-539L)

Rocker arm covers removed (model

5063-5395)

\

a. Removal

NOT E

On models 5063-5395 and 5063-539F,

one governor cover screw was removed

during fuel line clip removal.

(1)

(2)

(3)

Remove seven screw assemblies (1),

governor cover (2), and gasket (3) from

governor housing (4). Discard gasket.

Remove two bolts (5), two copper washers

(6), cover (7), and gasket (8) from

governor housing (4). Discard gasket and

copper washers.

Using retaining nut wrench, unscrew

packing nut (9) and remove spring pack

assembly (10) from side of governor

housing (4).

3-96

Change 1