TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 257 of 596

TM 9-2815-205-34

3-42. INJECTOR CONTROL TUBE AND THROTTLE DELAY REPLACEMENT

This task covers: a. Removal

b. Disassembly

d. Assembly

c. Cleaning/Inspection

e. Installation

INITIAL SETUP

MODELS

EXPENDABLE/DURABLE SUPPLIES

All

Cleaning solvent (App C, Item 9)

TOOLS AND SPECIAL TOOLS

EQUIPMENT CONDITION

Tool kit, general mechanics (App B, Item 107)

Para Description

Wrench, torque (App B, Item 118)

3-20 Rocker arm covers removed (models

5063-5299 and 5063-5398)

MATERIALS/PARTS

3-21 Rocker arm covers removed (models

Lockwashers (App F, Item 97)

5063-5392, 5063-5393, 5063-539F and

Nuts, self-locking (App F, Item 111)

5063-539L)

Nut

l

self-locking (App F, Item 105)

3-22 Rocker arm covers removed (model

5063-5395)

3-31 Throttle control rods disconnected

a. Removal

NOT E

Steps (1) and (4) apply to throttle

delay assembly used on right bank

of all except model 5063-5299.

Place wiping rag over oil drain

holes to prevent loss of parts.

(1) Remove two nuts (1), two Iockwashers (2),

and U-bolt (3) from throttle delay lever

assembly (4). Discard Iockwashers.

(2) Remove four screws (5) fastening injector

control tube brackets (6) to cylinder head.

(3) Disengage control rack levers (7) from

injector control racks (8) and lift tube

assembly (9) from cylinder head.

(4)

Remove piston and link assembly (10)

from throttle delay bracket (11).

b. Disassembly

NOT E

Note shape and location of the yield and return springs during disassembly.

(1) Injector control tube assembly (left or right)

(a) For left control tube assembly, remove bracket (6) from front of tube.

(3-127 blank)/3-128

Change 1