TM-9-2815-205-34
ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
AUGUST 1992
TM-9-2815-205-34 - Page 262 of 596
TM 9-2815-205-34
CAUTION
Place two-inch thick wooden blocks underneath ends of cylinder head before placing
on bench to protect cam followers and fuel injector tips from damage.
(4) Lift cylinder head assembly (7) from cylinder block.
(5) Remove two guide studs (6) from cylinder block.
(6) For all except model 5063-5398, remove three compression gaskets (8), seal strip (9), two
seals (10), four seals (11), and four seals (12) from cylinder bank. Discard gaskets, seals, and
seal strip.
(7) For model 5063-5398, remove three compression gaskets (8), seal strip (9), two seals (10),
four seals (13), four sleeves (14), four seals (15), and four sleeves (16) from cylinder bank.
Discard gaskets, seals, sleeves, and seal strip.
3-133
Back to Top
