TM 9-2815-205-34
(7)
(8)
(9)
Remove
flywheel
NOT E
On model 5063-5398, one of the eight screws (19) is shorter.
eight screws (19), eight Iockwashers (20), and eight flat washers (21) from sides of
housing (2). Discard lockwashers.
Strike front face of flywheel housing (2) alternately on each side with a soft head hammer.
Loosen housing and work off dowel pins (22).
Guide flywheel housing (2) off studs (7) and remove from engine using sling (3).
(11) Remove studs (7) from cylinder block.
(12) Remove flywheel housing gasket (23),
shim (24), and gasket (25) from end plate
(26). Discard gaskets.
3-141