TM-9-2815-205-34

ENGINE WITH CONTAINER; MODELS 5063-5299, 5063-5392, 5063-5393, 5063-5395, 5063-5398, 5063-539F, 5063-539L

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

AUGUST 1992

TM-9-2815-205-34 - Page 443 of 596

TM 9-2815-205-34

CAUTION

Exhaust valve bracket must rest squarely on ends of exhaust valves when tightening

rocker arm bracket bolts. Cocking exhaust valve bracket against valve stem wilI

damage exhaust valves.

(31) On models 5063-5299, 5063-5395, and 5063-5398, insert six bolts (4) through six brackets (6)

and three shafts (5), Swing rocker arms, shafts, and brackets into position and thread bolts into

cylinder head. Torque bolts to 50-55 Ib-ft (68-75 N·m).

(32) On models 5063-5392, 5063-5393, 5063-539F, and 5063-539L, insert six bolts (4) through

hold-down bracket (7), hold-down bracket 8), six brackets (6), and three shafts (5) with

hold-down brackets positioned as shown.

Swing rocker arms, shafts, and brackets into position

and thread bolts into cylinder head. Torque bolts to 50-55 Ib-ft (68-75 N·m).

CAUTION

Do not bend fuel tube assemblies and do not exceed specified torque on fuel tube nuts.

Excessive tightening will twist or fracture flared end of fuel tube and result in leaks.

(33) Remove covering from fuel injectors (2) and install six fuel tube assemblies (1) on fuel injectors

and fuel nipples (3). Using fuel nut wrench (92), torque fuel tube nuts to 130-160 lb-in (14.7-18.1

N·m).

END OF TASK

FOLLOW-ON MAINTENANCE

Para Description

3-43 Install cylinder head assembly.

3-8 Install engine lifter brackets.

Change 1

3-313