TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 285 of 968

TM 9-2815-210-34-2-2

FRAME 6

1.

2.

3.

Measure

Measure

inches.

Measure

NOTE

Readings must be within limits given in table 4-58.

If readings are not within given limits, throw away part

and get a new one.

free length of two valve rocker arm thrust springs (1).

load needed to squeeze two thrust springs (1) down to length of 2

maximum solid height of two thrust springs (1).

END OF TASK

Index

Number

1

1

1

Table 4-58. Valve Rocker Arm Thrust Spring Wear Limits

Item /Point of Measurement

Thrust spring free length

Thrust spring load at 2

inches

Thrust spring maximum

solid height

Size and Fit

of New Parts

“inches unless otherwise noted)

3.500

8.8 to 9.0 pounds

0.7300

Wear Limit

(inches)

None

7 pounds

None

4-266