TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 290 of 968
TM 9-2815-210-34-2-2
4-22.
CYLINDER
a
“
Cleaning .
FRAME 1
HEAD COVERS
1.
Clean oil filler cap assembly (1) with warm water and soap.
WARNING
Dry cleaning solvent is flammable. Do not use near
an open flame.
Keep a fire extinguisher nearby when
solvent is used.
Use only in well-ventilated places.
Failure to do this may result in injury to personnel and
damage to equipment.
2.
Clean two covers (2) using dry cleaning solvent. Scraper may be used to take
off gasket material.
Use stiff brush to take off sludge and gum deposits.
END OF TASK
4-271
Back to Top
