TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 298 of 968

TM 9-2815-210-34-2-2

4-25.

CRANKCASE BREATHER TUBE (ALL ENGINES EXCEPT LDS-465-2).

a.

Cleaning.

FRAME 1

1.

Clean rubber hose (1) using warm soapy water. Dry with clean cloth.

WARNING

Dry cleaning solvent is flammable. D

O

not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

2.

Clean outside of crankcase breather tube (2) with dry cleaning solvent. Clean

off sludge and gum deposits with a stiff brush. Dry with clean

WARNING

Eye shields must be worn when using compressed air.

Eye injury can occur if eye shields are not used.

cloth.

3.

Flush inside of crankcase breather tube (2) with dry cleaning solvent. Blow

dry with compressed air.

IF WORKING ON ANY ENGINE EXCEPT LDT-465-1C, GO TO FRAME 2.

IF WORKING ON ENGINE LDT-465-1C, END OF TASK

4-279