TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 292 of 968

TM 9-2815-210-34-2-2

FRAME 2

1.

Check that gasket surfaces of covers (1) do not have small nicks or burrs.

Take off small nicks and burrs with a fine mill file or crocus cloth.

2.

Check that oil filler cap assembly (2) has no cracks, dents or damaged lock

tabs (3), and that gasket (4) is not damaged in any way. If oil filler cap

assembly is damaged, get a new oil filler cap assembly.

END OF TASK

4-273