TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 297 of 968

TM 9-2815-210-34-2-2

4-24. CRANKCASE BREATHER TUBE ADAPTER.

a. Cleaning

There are no special cleaning procedures needed. Refer to

cleaning procedures given in para 4-3.

b .

Inspection and Repair.

FRAME 1

1.

Check that crankcase breather tube adapter (1) is not cracked, bent,

dented or damaged in any other way.

If crankcase breather tube adapter is

damaged in any way, get a new part.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame.

Keep a fire extinguisher nearby when sol-

vent is used.

Use only in well-ventilated places. Failure

to do this may result in injury to personnel and damage

to equipment.

2.

Check that crankcase breather tube adapter (1) has no minor nicks,

scratches or burrs.

To take out minor nicks, scratches or burrs, use

a fine mill file or crocus cloth dipped in dry cleaning solvent.

END OF TASK

4-278