TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 299 of 968

TM 9-2815-210-34-2-2

FRAME 2

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame.

Keep a fire extinguisher nearby when

solvent is used.

Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

1.

Clean two hose clamps (1), loop clamp (2), screw (3), washer (4), lockwasher

(5), and nut (6) with dry cleaning solvent. Clean off sludge and gum de-

posits with a stiff brush. Dry with clean cloth.

NOTE

Engines LD-465-1 and LD-465-1C use bracket (6).

Engine LDS-465-1A uses bracket (7).

2.

Clean bracket (6 or 7) with dry cleaning solvent. Clean off sludge and gum

deposits with a stiff brush. Dry with clean cloth.

END OF TASK

4-280