MWO-5-2350-262-35-4

ARMORED COMBAT EARTHMOVER (ACE), M9

MODIFICATION WORK ORDER

MWO-5-2350-262-35-4 - Page 139 of 207

MWO 5--2350--262--35--4

5--4

SECTION II INSTALLATION AND PRELIMINARY ROUTING OF HDC CABLE

ASSEMBLIES -- CONTINUED

NOTE

Steps c and d below apply to Figure 5--2.

c.

Orient large key (1) of cable connector W2J1 at 12 o’clock position and place in middle opening in

umbilical cable disconnect bracket (3) as shown. All cable connectors are installed on umbilical cable

disconnect bracket with four socket head cap screws, MS24667--4, (2).

d.

Orient large key (1) of cable connector W1J1 at 12 o’clock position and place in left most opening (4) in

umbilical cable disconnect bracket (3) as shown for a typical connector.

Figure 5--2. Cable Connector Installation Orientation (Typical)