TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 123 of 266
TM 9–1200–215–34&P
4–9
4–14.
TOP COVER ASSEMBLY, NEOPRENE RUBBER STRIP(S)
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kit, JTK–17LAL (item 34, Appendix E)
Tool Kit, General Mechanic’s (item 42, Appendix E)
Materials/Parts:
Cleaning Cloth (item 13, Appendix D)
Alcohol, Denatured (item 4, Appendix D)
Adhesive (item 1, Appendix D)
Rubber Strip, Neoprene (item 22, Appendix D)
Equipment Condition:
Top cover assembly removed; if not, remove top
cover in accordance with paragraph 4–13
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
•
The PDIU contains ESD sensitive
components.
Wear a protective
ESD wrist strap whenever handling
components.
Failure to comply may
result in damage to equipment.
•
Damage to RFI/EMI contact strip
may occur.
Do not slide cover off of
housing.
Pick cover straight up.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Carefully scrape damaged neoprene rubber
strip(s) (1) from cover (2).
WARNING
Do not breathe fumes from alcohol.
Use with adequate ventilation.
3.
Clean mounting area with alcohol and wiping
rag.
Change 1
2
2–5/16 IN.
1–3/8 IN.
1 IN.
1–3/8 IN.
2–5/16 IN.
3–15/16 IN.
1
Back to Top
