TM-9-1200-215-34-P

AUTOMATIC FIRE CONTROL SYSTEM (AFCS)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

FEBRUARY 1999

TM-9-1200-215-34-P - Page 132 of 266

TM 9–1200–215–34&P

4–18

4–18

ELECTRICAL INDICATOR PANEL CONTINUED

a.

REMOVAL CONTINUED

5.

Remove 18 screws (12) and 18 flat washers

(13) securing panel (14) to housing (15).

6.

Remove panel (14).

7.

Remove preformed packing (16) from groove

in housing (15).

Discard preformed packing if

necessary.

Clean groove using wiping rag.

b.

INSPECTION

1.

Inspect connectors for bent, broken, or

corroded contacts.

Repair, clean, or forward to

depot for repair beyond DS level.

2.

Inspect wiring for frayed, broken, burnt, or

shorting conditions.

Forward panel to depot

for repair.

c.

INSTALLATION

CAUTION

ESD SENSITIVE

•

The PDIU contains ESD sensitive

components.

Wear a protective

ESD wrist strap whenever handling

components.

Failure to comply may

result in damage to equipment.

•

Damage to RFI/EMI contact strip

may occur.

Do not slide cover off of

housing.

Pick cover straight up.

1.

Attach ESD grounding strap to wrist and

ground to ensure ESD protection.

2.

Install preformed packing (16) in groove of

housing (15).

3.

Position panel (14) on housing (15).

4.

Apply thread compound to threads of 18

screws (12).

5.

Install 18 flat washers (13) and 18 screws (12).

12

13

14

15

16