TM-9-1200-215-34-P

AUTOMATIC FIRE CONTROL SYSTEM (AFCS)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

FEBRUARY 1999

TM-9-1200-215-34-P - Page 135 of 266

TM 9–1200–215–34&P

4–21

4–19

ELECTRICAL INDICATOR PANEL, LEDs DS1 AND DS2 CONTINUED

b.

INSTALLATION

CAUTION

ESD SENSITIVE

•

The PDIU contains ESD sensitive

components.

Wear a protective

ESD wrist strap whenever handling

components.

Failure to comply may

result in damage to equipment.

•

Damage to RFI/EMI contact strip

may occur.

Do not slide cover off of

housing.

Pick cover straight up.

1.

Attach ESD grounding strap to wrist and

ground to ensure ESD protection.

WARNING

•

Do not breathe fumes from

adhesive/sealant.

Use with

adequate ventilation.

•

Adhesive/sealant may cause eye or

skin irritation, avoid direct contact.

2.

Apply a thin coating of adhesive/sealant to the

panel mounting surface of DS1 (1) or DS2 (2).

3.

Insert DS1 (1) or DS2 (2) into panel (5) and

install lockwasher (4) and nut (3).

4.

Cut the leads of DS1 (1) or DS2 (2) back to

1/2–inch of the panel (5).

5.

Using flux and solder, solder leads to DS1 (1)

or DS2 (2).

Remove tags.

6.

Clean solder joints with acid swabbing brush

and alcohol.

7.

Install Electrical Indicator Panel in accordance

with procedure outlined in paragraph 4–18.

5

4

3

1/2

–INCH

1

2