TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 126 of 266
TM 9–1200–215–34&P
4–12
4–15.
TOP COVER ASSEMBLY AND BOTTOM COVER, RFI/EMI CONTACT STRIP
CONTINUED
b.
INSTALLATION
CAUTION
ESD SENSITIVE
•
The PDIU contains ESD sensitive
components.
Wear a protective
ESD wrist strap whenever handling
components.
Failure to comply may
result in damage to equipment.
•
Damage to RFI/EMI contact strip
may occur.
Do not slide cover off of
housing.
Pick cover straight up.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Remove backing from adhesive on
replacement RFI/EMI contact strip (1).
3.
Press strip (1) in place on top/bottom cover
(2).
4.
Install top/bottom cover (2) in accordance with
procedure outlined in paragraph 4–13.
2
2
1
1
CONTACT
FINGER EDGE
CONTACT
FINGER EDGE
Back to Top
