TM-9-1200-215-34-P

AUTOMATIC FIRE CONTROL SYSTEM (AFCS)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

FEBRUARY 1999

TM-9-1200-215-34-P - Page 124 of 266

TM 9–1200–215–34&P

4–10

4–14.

TOP COVER ASSEMBLY, NEOPRENE RUBBER STRIP(S) CONTINUED

b.

INSTALLATION

CAUTION

ESD SENSITIVE

•

The PDIU contains ESD sensitive

components.

Wear a protective

ESD wrist strap whenever handling

components.

Failure to comply may

result in damage to equipment.

•

Damage to RFI/EMI contact strip

may occur.

Do not slide cover off of

housing.

Pick cover straight up.

1.

Attach ESD grounding strap to wrist and

ground to ensure ESD protection.

2.

Cut strip(s) from neoprene rubber stock

3–15/16 inches long by 1 inch wide.

Return

any excess to supplies.

3.

Apply adhesive to neoprene rubber strip(s) (1).

4.

Press neoprene rubber strip(s) (1) in place on

cover (2) using mounting dimensions shown.

Allow to cure for 20 minutes.

5.

Install top cover (2) in accordance with

procedure outlined in paragraph 4–13.

2

2–5/16 IN.

1–3/8 IN.

1 IN.

1–3/8 IN.

2–5/16 IN.

3–15/16 IN.

1