TM-9-1200-215-34-P

AUTOMATIC FIRE CONTROL SYSTEM (AFCS)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

FEBRUARY 1999

TM-9-1200-215-34-P - Page 114 of 266

TM 9–1200–215–34&P

3–23

3–19.

DU CONTROL PANEL SWITCH BOOT MAINTENANCE INSTRUCTIONS

DESCRIPTION

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP

Tools:

Tool Kits,TK–100/G (item 48, Appendix E)

Materials/Parts:

Sealing Compound (item 25, Appendix D)

Equipment Conditions:

Unenergized DU on workbench.

Personnel Required:

One MOS 35Y

a.

REMOVAL

NOTE

Ensure that switch(es) do not drop

to the inside of DU when removing

boot from control panel.

1.

Remove two screws (1) from switch guard (2).

2.

Lift switch guard (2) and unscrew switch boot

(3) from switch (4).

3.

Remove switch boot (3), switch guard (2), and

seal washer (5) that secure switch (4) to

control panel.

4.

Lift switch guard(s) (6) and unscrew switch

boots(s) (7) from switch(es) (8).

5.

Remove switch boot(s) (7), switch guard(s) (6),

and seal washer(s) (9) that secure switch(es)

(8) to control panel.

b.

INSTALLATION

1.

Install seal washer(s) (9), switch guard(s) (6),

and switch boot(s) (7) securing switch(es) (8)

to control panel.

2.

Install seal washer (5), switch guard (2), and

secure guard to control panel using two screws

(1).

3.

Install switch boot (3) on switch (4) securing

switch to control panel.

1

2

3

4

5

6

7

8

9

6

7

8

9