TM-9-1200-215-34-P

AUTOMATIC FIRE CONTROL SYSTEM (AFCS)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

FEBRUARY 1999

TM-9-1200-215-34-P - Page 109 of 266

TM 9–1200–215–34&P

3–18

3–17.

KEYBOARD CABLE ASSEMBLY MAINTENANCE INSTRUCTIONS

DESCRIPTION

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP

Tools:

Tool Kits, JTK–17LAL, TK–101/G, or TK–105/G

(items 34, 35, & 36, Appendix E)

Torque Wrench, 0–15 in.–lb (item 39, Appendix E)

3/16” Flat Tip Screwdriver Socketwrench

(item 23, Appendix E)

Work Station Kit, Electronic (item 38, Appendix E)

Equipment Conditions:

DU bottom cover removed; if not, remove bottom

cover in accordance with paragraph 3–13

Personnel Required:

One MOS 35Y

a.

REMOVAL

CAUTION

ESD SENSITIVE

The DU contains ESD sensitive

components. Wear a protective

ESD wrist strap whenever handling

components. Failure to comply may

result in damage to equipment.

1.

Attach ESD grounding strap to wrist and

ground, to ensure ESD protection.

2.

Unscrew two captive screws (1) securing

connector A1P3 (2) to EL panel receptacle (3).

Disconnect connector.

3.

Unscrew two captive screws (4) securing

connector A2P1 (5) to switch panel receptacle

J1 (6). Disconnect connector, and remove

cable assembly from DU housing.

1

2

4

5

3

6