TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 99 of 266
TM 9–1200–215–34&P
3–8
3–13.
BOTTOM COVER MAINTENANCE INSTRUCTIONS
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kits, JTK–17LAL, TK–101/G, or TK–105/G
(items 34, 35, & 36, Appendix E)
Torque Wrench,
0–15 in.–lb (item 39, Appendix E)
#2 Crosstip Screwdriver Socketwrench
(item 22, Appendix E)
Work Station
Kit, Electronic (item 38, Appendix E)
Equipment Conditions:
Unenergized DU is on workbench
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
The DU contains ESD sensitive
components. Wear a protective
ESD wrist strap whenever handling
components. Failure to comply may
result in damage to equipment.
1.
Attach ESD grounding strap to wrist and
ground, to ensure ESD protection.
2.
Remove bottom cover (1) by removing 18
screws (2). Lift bottom cover off housing.
CAUTION
The EMI shielding gasket is vital to
this piece of equipment and is easily
damaged. Handle with care when
removing or replacing it. Failure to
comply may result in damage to
equipment.
3.
Inspect EMI shielding gasket (3) in groove in
housing (4) for cuts, nicks, or signs of
stretching. Discard EMI shielding gasket if
unserviceable.
Change 1
3
2
1
4
Back to Top
