TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 107 of 266
TM 9–1200–215–34&P
3–16
3–16.
HANDLE MAINTENANCE INSTRUCTIONS
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kits, JTK–17LAL, TK–101/G, or TK–105/G
(items 34, 35, & 36, Appendix E)
Torque Wrench, 0–150 in.–lb (item 41, Appendix E)
Work Station Kit, Electronic (item 38, Appendix E)
Materials/Parts:
Nuts, Self–Locking (item 2, Appendix F)
Packing, Preformed (item 11, Appendix F)
Equipment Conditions:
DU bottom cover removed; if not, remove bottom
cover in accordance with paragraph 3–13
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
The DU contains ESD sensitive
components. Wear a protective
ESD wrist strap whenever handling
components. Failure to comply may
result in damage to equipment.
1.
Attach ESD grounding strap to wrist and
ground, to ensure ESD protection.
2.
Remove two self–locking nuts (1) and two
washers (2) securing handle (3) to DU
housing. Discard self–locking nuts.
3.
Remove handle (3) and two preformed
packings (4) from DU housing. Discard
preformed packings.
1
2
3
4
Back to Top
