TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 101 of 266
TM 9–1200–215–34&P
3–10
3–14.
ELECTROLUMINESCENT PANEL MAINTENANCE INSTRUCTIONS
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kits, JTK–17LAL, TK–101/G, or TK–105/G
(items 34, 35, & 36, Appendix E)
Torque
Wrench, 0–15 in.–lb (item 39, Appendix E)
Torque
Wrench, 0–150 in.–lb (item 41, Appendix E)
Work Station
Kit, Electronic (item 38, Appendix E)
#1 Crosstip Screwdriver Socketwrench
(item 21, Appendix E)
3/16” Flat Tip Screwdriver Socketwrench
(item 23, Appendix E)
Materials/Parts:
Nuts, Self–Locking (item 2, Appendix F)
Cleaning Cloth (item 13, Appendix D)
Alcohol, Denatured (item 4, Appendix D)
Packing, Preformed (item 11, Appendix F)
Equipment Conditions:
DU bottom cover removed; if not, remove bottom
cover in accordance with paragraph 3–13
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
The DU contains ESD sensitive
components. Wear a protective
ESD wrist strap whenever handling
components. Failure to comply may
result in damage to equipment.
1.
Attach ESD grounding strap to wrist and
ground, to ensure ESD protection.
2.
Remove two self–locking nuts (1) and two flat
washers (2) securing handle (3) to DU
housing. Remove handle and two preformed
packings (4) from housing. Discard
self–locking nuts and preformed packings.
3.
Unscrew two captive screws (5) securing
connector A1P3 (6) to EL panel receptacle (7).
Disconnect connector from EL panel.
4.
Unscrew two captive screws (8) securing
connector A1P1 (9) to EL display receptacle
(10). Disconnect connector from EL panel.
5.
Unscrew two captive screws (11) securing
connector A1P4 (12) to EL panel receptacle J4
(13). Disconnect connector from EL display.
Change 1
1
2
3
7
10
13
4
12
11
8
9
6
5
Back to Top
