TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 125 of 266
TM 9–1200–215–34&P
4–11
4–15.
TOP COVER ASSEMBLY AND BOTTOM COVER, RFI/EMI CONTACT STRIP
DESCRIPTION
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Tool Kit, JTK–17LAL (item 34, Appendix E)
Tool Kit, General Mechanic’s (item 42, Appendix E)
Materials/Parts:
Cleaning Cloth (item 13, Appendix D)
Alcohol, Denatured (item 4, Appendix D)
Equipment Condition:
Top/bottom covers removed; if not, remove
top/bottom covers in accordance with paragraph
4–13
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
•
The PDIU contains ESD sensitive
components.
Wear a protective
ESD wrist strap whenever handling
components.
Failure to comply may
result in damage to equipment.
•
Damage to RFI/EMI contact strip
may occur.
Do not slide cover off of
housing.
Pick cover straight up.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Carefully scrape damaged RFI/EMI contact
strip (1) from top or bottom cover (2).
WARNING
Do not breathe fumes from alcohol.
Use with adequate ventilation.
CAUTION
If teeth are missing from contact
strip, check inside housing for
missing pieces.
3.
Clean mounting area with wiping rag and
alcohol.
Change 1
2
2
1
1
CONTACT
FINGER EDGE
CONTACT
FINGER EDGE
Back to Top
