TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 131 of 266
TM 9–1200–215–34&P
4–17
4–18.
ELECTRICAL INDICATOR PANEL
DESCRIPTION
This task covers:
a.
Removal
b.
Inspection
c.
Installation
INITIAL SETUP
Tools:
Tool Kit, JTK–17LAL (item 34, Appendix E)
Tool Kit, General Mechanic’s (item 42, Appendix E)
Socket Wrench, screwdriver, crosstip #1
(item 45, Appendix E)
Materials/Parts:
Thread Compound (item 14, Appendix D)
Cleaning Cloth (item 13, Appendix D)
Preformed Packing (item 5, Appendix F)
Lockwashers (item 6, Appendix F)
Equipment Condition:
DC–DC Converter (power supply) PS1 removed; if
not, remove DC–DC Converter in accordance with
paragraph 4–17
Personnel Required:
One MOS 35Y
a.
REMOVAL
CAUTION
ESD SENSITIVE
•
The PDIU contains ESD sensitive
components.
Wear a protective
ESD wrist strap whenever handling
components.
Failure to comply may
result in damage to equipment.
•
Damage to RFI/EMI contact strip
may occur.
Do not slide cover off of
housing.
Pick cover straight up.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Remove eight screws (1), eight lockwashers
(2), and eight flat washers (3) securing two
tiebars (4 and 5) to filter assembly (6).
Discard
lockwashers.
3.
Unlatch and disconnect connector P5 (7) from
connector J8 (8).
4.
Unscrew four connector retaining screws (9)
and unplug connector P3 (10) and P4 (11)
from filter assembly (6).
Change 1
3
5
1
2
4
10
9
7
8
61
1
Back to Top
