TM-9-1240-401-34-P
TELESCOPE MOUNT M146: M118A2 AND M118A3; TELESCOPE MOUNT M145: M145A1; PANORAMIC TELESCOPE: M117 AND M117A2; FIRE CONTROL QUADRANT: M15; PERISCOPE: M42
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
JULY 1993
TM-9-1240-401-34-P - Page 237 of 590
TM 9-1240-401-34&P
5.1-3. REPAIR PARTS
Repair parts are listed and illustrated in the repair parts and special tools list, appendix D.
Section II. Inspections
5.1-4. GENERAL
a.
Inspection is performed primarily to determine the following:
(1) Completeness.
(2)
The nature of unserviceability.
(3)
The work, repair parts, and supplies required to return the materiel to serviceability.
(4)
That the work in process is being performed properly.
(5)
That completed work complies fully with serviceability standards.
b.
The M15 fire control quadrant is considered serviceable when:
(1)
It is complete and properly performs its intended function.
(2)
All modification work orders (MWOs) have been applied.
(3)
All defects disclosed by the inspection have been corrected.
5.1-5. CATEGORIES OF INSPECTION
Categories of inspection define responsibilities.
a.
An initial inspection (ref. para 5.1-6 and 5.1-7) is performed immediately on receipt of the M15 quadrant for maintenance.
This inspection will determine the amount and type of work to be performed.
b.
A final inspection of the M15 quadrant (ref. para 5.1-24) is performed after repairs have been completed to ensure the
item meets serviceability standards.
Change 1
5.1-3
Back to Top
