TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 493 of 1417
INSTALLATION - Continued
59.
Connect ether supply tube (Figure 24, Item 1) to ether atomizer nozzle (Figure 24, Item 24).
60.
Connect connector (Figure 24, Item 17) to oil pressure sending unit (Figure 24, Item 16).
61.
Connect fuel supply line (Figure 24, Item 18) to fuel transfer pump (Figure 24, Item 19).
62.
Connect connector (Figure 24, Item 21) to fuel transfer pump (Figure 24, Item 20).
63.
Connect connector (Figure 24, Item 23) to throttle control solenoid connector (Figure 24, Item 22).
64.
Connect air line (Figure 24, Item 8) to air compressor line (Figure 24, Item 9).
65.
Install temperature sensor (Figure 24, Item 11), lockwasher (Figure 24, Item 12), and ground strap
(Figure
24,
Item 13) on engine (Figure 24, Item 10) with washer (Figure 24, Item 14) and screw
(Figure
24,
Item
15).
66.
Connect wire (Figure 24, Item 6) to temperature sensor wire (Figure 24, Item 7).
67.
Install cables (Figure 24, Item 5) on engine (Figure 24, Item 10) with two clamps (Figure 24, Item 2) and screws
(Figure 24, Item 3).
68.
Install tiedown strap (Figure 24, Item 4) on cables (Figure 24, Item 5) and temperature sensor wire
(Figure
24,
Item 6).
2
3
5
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
22
23
21
20
24
1
M9270-1DAA
Figure 24.
Fuel Supply and Electrical System Installation.
TM 9-2320-272-23-2
0213
0213-32
Back to Top
