TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 353 of 623
INSTALLATION
1.
Install two spacers (Figure 5, Item 13) and pneumatic controller (Figure 5, Item 7) on mounting plate
(Figure
5,
Item
11) with four screws (Figure 5, Item 1).
2.
Install mounting plate (Figure 5, Item 11) and pneumatic controller (Figure 5, Item 7) on cab floor
(Figure
5,
Item
10) with three screws (Figure 5, Item 12).
NOTE
Wrap all male threads with antiseize tape before installation.
3.
Install elbows (Figure 5, Items 2 and 6) and relief valve (Figure 5, Item 4) on pneumatic controller
(Figure
5,
Item
7).
4.
Connect lines (Figure 5, Items 3 and 5) to elbows (Figure 5, Items 2 and 6).
5.
Connect connector (Figure 5, Item 9) to solenoid receptacle (Figure 5, Item 8).
M6336DAA
12
1
13
2
3
4
5
8
9
10
11
7
6
Figure 5.
Pneumatic Controller Installation.
END OF TASK
TM 9-2320-272-23-5
0810
0810-8
Back to Top
