TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 362 of 623
FIELD MAINTENANCE
PRESSURE TRANSDUCER REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0826, Table 1, Item 56)
Materials/Parts
Cotter Pin (WP
0827, Table 1, Item 9) Qty:
2
Lockwasher
(WP
0827, Table 1, Item 394) Qty:
3
Equipment Condition
Parking brake set. (TM 9-2320-272-10)
Air reservoirs drained. (TM 9-2320-272-10)
REMOVAL
NOTE
Perform Steps (1) through (7) for vehicles equipped with PTO.
1.
Remove six screws (Figure 1, Item 2) and access cover (Figure 1, Item 3) from shift panel (Figure 1, Item 1).
2.
Remove two nuts (Figure 1, Item 9), screws (Figure 1, Item 13), clamp (Figure 1, Item 12), PTO control cable
(Figure 1, Item 8), and spacer (Figure 1, Item 11) from bracket (Figure 1, Item 10).
3.
Remove cotter pin (Figure 1, Item 4), washer (Figure 1, Item 5), clevis pin (Figure 1, Item 7), and clevis
(Figure
1, Item 6) from control lever (Figure 1, Item 14). Discard cotter pin.
M10250DAA
7
3
4
5
6
2
8
9
10
11
12
13
14
1
Figure 1.
Pressure Transducer Removal.
TM 9-2320-272-23-5
0812
0812-1
Back to Top
